Faucet, toilet and fixture installation in Murfreesboro

A new faucet is a small project until the shutoff valve underneath will not turn. Then it is a leak and a trip to the store. Most fixture jobs in Murfreesboro go the same way: the fixture is easy, and what is behind it decides how long the visit takes.

We install fixtures you have bought or help you choose them, and we check the valves, supply lines and drains behind each one before we call it done.

Start with the valves

In houses that have been around a while, the shutoff valves under sinks and behind toilets are often the original ones. They have not been turned in decades. When you finally ask them to close, they either will not move or they start to drip. We check them first, and replace them with quarter-turn valves when they are in bad shape, so the next person has an easier time.

What we install

  • Kitchen and bathroom faucets
  • Toilets, including swapping out a worn flange or wax ring
  • Bathroom and kitchen sinks and their drains
  • Garbage disposals
  • Washing machine boxes and supply valves
  • Shower valves and trim

Houses with their own habits

A bungalow near the Public Square may have a bathroom added in a different decade than the rest of the house, with a different drain size and a vent that goes through the wall somewhere you would not guess. A house off Memorial Boulevard may have a builder-grade fixture package that is fine for a decade and then starts to show its age all at once.

We have seen both, and the approach is the same. Look at what is behind the fixture first, then install, then test.

Fixture jobs and what usually comes with them

JobOften needsTypical visit
Kitchen faucetNew supply lines, working shutoffsShort
ToiletNew wax ring or seal, flange checkShort
DisposalElectrical outlet nearby, drain adapterMedium
Vanity and sinkDrain and supply alignmentMedium
Washer boxDrain standpipe, supply valvesMedium

Student rentals and landlord calls

Rental houses around MTSU get hard use. Toilets run, faucets drip, a disposal jams the week before a lease turns over. If you manage one or more properties, call and tell us what is going on. We will tell you quickly what the fix involves, so you are not waiting on a repair that could have been done in one visit.

Bring your own fixture or buy through us

If you have already bought the fixture, we will install it. If a part is missing or the fixture does not fit your plumbing, we will tell you before we start rather than halfway through.

Fixture questions

Why is my toilet rocking?

Usually the flange is loose or sits too low, or the floor has settled. It is a repair worth doing, because a rocking toilet will eventually break the wax seal and leak into the floor.

Can you install a disposal where there was none?

Usually, as long as there is an outlet or we can add one with a licensed electrician. We will check the sink drain setup first.

A rental turnover checklist

  • Flush every toilet twice and watch for a slow refill or a trickle in the bowl
  • Run each faucet for a minute and check under the sink for dampness
  • Turn each shutoff valve a quarter turn to confirm it moves, then back
  • Run the disposal with water and listen for grinding or a loose flange
  • Look at the water heater pan and the floor around the base
  • Check showerheads for leaks at the arm and diverter

Why a short list saves money

A landlord who does this before a tenant moves in finds the little things while they are still little. A running toilet that wastes a few hundred gallons a day shows up on the water bill first, then in a complaint. We can do the walk-through and fix what we find in one visit.

Fixtures & Installs in Murfreesboro?

(423) 227-6947

Call or text, or send us a message and we will get back to you.

Call now Free quote